Article 1015: Submission, Receipt and Opening of Tenders and Awarding of Contracts
1. An entity shall use procedures for the submission, receipt and opening of tenders and the awarding of contracts that are consistent with the following:
(a) tenders shall normally be submitted in writing directly or by mail;
(b) where tenders by telex, telegram, telecopy or other means of electronic transmission are permitted, the tender made thereby must include all the information necessary for the evaluation of the tender, in particular the definitive price proposed by the supplier and a statement that the supplier agrees to all the terms and conditions of the invitation to tender;
(c) a tender made by telex, telegram, telecopy or other means of electronic transmission must be confirmed promptly by letter or by the dispatch of a signed copy of the telex, telegram, telecopy or electronic message;
(d) the content of the telex, telegram, telecopy or electronic message shall prevail where there is a difference or conflict between that content and the content of any documentation received after the time limit for submission of tenders;
(e) tenders presented by telephone shall not be permitted;
(f) requests to participate in selective tendering procedures may be submitted by telex, telegram or telecopy and if permitted, may be submitted by other means of electronic transmission; and
(g) the opportunities that may be given to suppliers to correct unintentional errors of form between the opening of tenders and the awarding of the contract shall not be administered in a manner that would result in discrimination between suppliers.
In this paragraph, "means of electronic transmission" consists of means capable of producing for the recipient at the destination of the transmission a printed copy of the tender.
2. No entity may penalize a supplier whose tender is received in the office designated in the tender documentation after the time specified for receiving tenders if the delay is due solely to mishandling on the part of the entity. An entity may also consider, in exceptional circumstances, tenders received after the time specified for receiving tenders if the entity's procedures so provide.
3. All tenders solicited by an entity under open or selective tendering procedures shall be received and opened under procedures and conditions guaranteeing the regularity of the opening of tenders. The entity shall retain the information on the opening of tenders. The information shall remain at the disposal of the competent authorities of the Party for use, if required, under Article 1017, Article 1019 or Chapter Twenty (Institutional Arrangements and Dispute Settlement Procedures).
4. An entity shall award contracts in accordance with the following:
(a) to be considered for award, a tender must, at the time of opening, conform to the essential requirements of the notices or tender documentation and have been submitted by a supplier that complies with the conditions for participation;
(b) if the entity has received a tender that is abnormally lower in price than other tenders submitted, the entity may inquire of the supplier to ensure that it can comply with the conditions of participation and is or will be capable of fulfilling the terms of the contract;
(c) unless the entity decides in the public interest not to award the contract, the entity shall make the award to the supplier that has been determined to be fully capable of undertaking the contract and whose tender is either the lowest-priced tender or the tender determined to be the most advantageous in terms of the specific evaluation criteria set out in the notices or tender documentation;
(d) awards shall be made in accordance with the criteria and essential requirements specified in the tender documentation; and
(e) option clauses shall not be used in a manner that circumvents this Chapter.
5. No entity of a Party may make it a condition of the awarding of a contract that the supplier has previously been awarded one or more contracts by an entity of that Party or that the supplier has prior work experience in the territory of that Party.
6. An entity shall:
(a) on request, promptly inform suppliers participating in tendering procedures of decisions on contract awards and, if so requested, inform them in writing; and
(b) on request of a supplier whose tender was not selected for award, provide pertinent information to that supplier concerning the reasons for not selecting its tender, the relevant characteristics and advantages of the tender selected and the name of the winning supplier.
7. No later than 72 days after the award of a contract, an entity shall publish a notice in the appropriate publication referred to in Annex 1010.1 that shall contain the following information:
(a) a description of the nature and quantity of goods or services included in the contract;
(b) the name and address of the entity awarding the contract;
(c) the date of the award;
(d) the name and address of each winning supplier;
(e) the value of the contract, or the highest-priced and lowest-priced tenders considered in the process of awarding the contract; and
(f) the tendering procedure used.
8. Notwithstanding paragraphs 1 through 7, an entity may withhold certain information on the award of a contract where disclosure of the information:
(a) would impede law enforcement or otherwise be contrary to the public interest;
(b) would prejudice the legitimate commercial interest of a particular person; or
(c) might prejudice fair competition between suppliers.
Article 1016: Limited Tendering Procedures
1. An entity of a Party may, in the circumstances and subject to the conditions set out in paragraph 2, use limited tendering procedures and thus derogate from Articles 1008 through 1015, provided that such limited tendering procedures are not used with a view to avoiding maximum possible competition or in a manner that would constitute a means of discrimination between suppliers of the other Parties or protection of domestic suppliers.
2. An entity may use limited tendering procedures in the following circumstances and subject to the following conditions, as applicable:
(a) in the absence of tenders in response to an open or selective call for tenders, or where the tenders submitted either have resulted from collusion or do not conform to the essential requirements of the tender documentation, or where the tenders submitted come from suppliers that do not comply with the conditions for participation provided for in accordance with this Chapter, on condition that the requirements of the initial procurement are not substantially modified in the contract as awarded;
(b) where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists;
(c) in so far as is strictly necessary where, for reasons of extreme urgency brought about by events unforeseeable by the entity, the goods or services could not be obtained in time by means of open or selective tendering procedures;
(d) for additional deliveries by the original supplier that are intended either as replacement parts or continuing services for existing supplies, services or installations, or as the extension of existing supplies, services or installations, where a change of supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services, including software to the extent that the initial procurement of the software was covered by this Chapter;
(e) where an entity procures a prototype or a first good or service that is developed at its request in the course of and for a particular contract for research, experiment, study or original development. Where such contracts have been fulfilled, subsequent procurement of goods or services shall be subject to Articles 1008 through 1015. Original development of a first good may include limited production in order to incorporate the results of field testing and to demonstrate that the good is suitable for production in quantity to acceptable quality standards, but does not include quantity production to establish commercial viability or to recover research and development costs;
(f) for goods purchased on a commodity market;
(g) for purchases made under exceptionally advantageous conditions that only arise in the very short term, such as unusual disposals by enterprises that are not normally suppliers or disposal of assets of businesses in liquidation or receivership, but not routine purchases from regular suppliers;
(h) for a contract to be awarded to the winner of an architectural design contest, on condition that the contest is
(i) organized in a manner consistent with the principles of this Chapter, including regarding publication of an invitation to suitably qualified suppliers to participate in the contest,
(ii) organized with a view to awarding the design contract to the winner, and
(iii) to be judged by an independent jury; and
(i) where an entity needs to procure consulting services regarding matters of a confidential nature, the disclosure of which could reasonably be expected to compromise government confidences, cause economic disruption or similarly be contrary to the public interest.
3. An entity shall prepare a report in writing on each contract awarded by it under paragraph 2. Each report shall contain the name of the procuring entity, indicate the value and kind of goods or services procured, the name of the country of origin, and a statement indicating the circumstances and conditions described in paragraph 2 that justified the use of limited tendering. The entity shall retain each report. They shall remain at the disposal of the competent authorities of the Party for use, if required, under Article 1017, Article 1019 or Chapter Twenty (Institutional Arrangements and Dispute Settlement Procedures).
Section C - Bid Challenge
1. In order to promote fair, open and impartial procurement procedures, each Party shall adopt and maintain bid challenge procedures for procurement covered by this Chapter in accordance with the following:
(a) each Party shall allow suppliers to submit bid challenges concerning any aspect of the procurement process, which for the purposes of this Article begins after an entity has decided on its procurement requirement and continues through the contract award;
(b) a Party may encourage a supplier to seek a resolution of any complaint with the entity concerned prior to initiating a bid challenge;
(c) each Party shall ensure that its entities accord fair and timely consideration to any complaint regarding procurement covered by this Chapter;
(d) whether or not a supplier has attempted to resolve its complaint with the entity, or following an unsuccessful attempt at such a resolution, no Party may prevent the supplier from initiating a bid challenge or seeking any other relief;
(e) a Party may require a supplier to notify the entity on initiation of a bid challenge;
(f) a Party may limit the period within which a supplier may initiate a bid challenge, but in no case shall the period be less than 10 working days from the time when the basis of the complaint became known or reasonably should have become known to the supplier;
(g) each Party shall establish or designate a reviewing authority with no substantial interest in the outcome of procurements to receive bid challenges and make findings and recommendations concerning them;
(h) on receipt of a bid challenge, the reviewing authority shall expeditiously investigate the challenge;
(i) a Party may require its reviewing authority to limit its considerations to the challenge itself;
(j) in investigating the challenge, the reviewing authority may delay the awarding of the proposed contract pending resolution of the challenge, except in cases of urgency or where the delay would be contrary to the public interest;
(k) the reviewing authority shall issue a recommendation to resolve the challenge, which may include directing the entity to re-evaluate offers, terminate or re-compete the contract in question;
(l) entities normally shall follow the recommendations of the reviewing authority;
(m) each Party should authorize its reviewing authority, following the conclusion of a bid challenge procedure, to make additional recommendations in writing to an entity respecting any facet of the entity's procurement process that is identified as problematic during the investigation of the challenge, including recommendations for changes in the procurement procedures of the entity to bring them into conformity with this Chapter;
(n) the reviewing authority shall provide its findings and recommendations respecting bid challenges in writing and in a timely manner, and shall make them available to the Parties and interested persons;
(o) each Party shall specify in writing and shall make generally available all its bid challenge procedures; and
(p) each Party shall ensure that each of its entities maintains complete documentation regarding each of its procurements, including a written record of all communications substantially affecting each procurement, for at least three years from the date the contract was awarded, to allow verification that the procurement process was carried out in accordance with this Chapter.
2. A Party may require that a bid challenge be initiated only after the notice of procurement has been published or, where a notice is not published, after tender documentation has been made available. Where a Party imposes such a requirement, the 10-working day period described in paragraph 1(f) shall begin no earlier than the date that the notice is published or the tender documentation is made available.
Section D - General Provisions
1. Nothing in this Chapter shall be construed to prevent a Party from taking any action or not disclosing any information which it considers necessary for the protection of its essential security interests relating to the procurement of arms, ammunition or war materials, or to procurement indispensable for national security or for national defense purposes.
2. Provided that such measures are not applied in a manner that would constitute a means of arbitrary or unjustifiable discrimination between Parties where the same conditions prevail or a disguised restriction on trade between the Parties, nothing in this Chapter shall be construed to prevent any Party from adopting or maintaining measures:
(a) necessary to protect public morals, order or safety;
(b) necessary to protect human, animal or plant life or health;
(c) necessary to protect intellectual property; or
(d) relating to goods or services of handicapped persons, of philanthropic institutions or of prison labor.
Article 1019: Provision of Information
1. Further to Article 1802(1) (Publication), each Party shall promptly publish any law, regulation, precedential judicial decision, administrative ruling of general application and any procedure, including standard contract clauses, regarding government procurement covered by this Chapter in the appropriate publications referred to in Annex 1010.1.
2. Each Party shall:
(a) on request, explain to another Party its government procurement procedures;
(b) ensure that its entities, on request from a supplier, promptly explain their procurement practices and procedures; and
(c) designate by January 1, 1994 one or more contact points to
(i) facilitate communication between the Parties, and
(ii) answer all reasonable inquiries from other Parties to provide relevant information on matters covered by this Chapter.
3. A Party may seek such additional information on the award of the contract as may be necessary to determine whether the procurement was made fairly and impartially, in particular with respect to unsuccessful tenders. To this end, the Party of the procuring entity shall provide information on the characteristics and relative advantages of the winning tender and the contract price. Where release of this information would prejudice competition in future tenders, the information shall not be released by the requesting Party except after consultation with and agreement of the Party that provided the information.
4. On request, each Party shall provide to another Party information available to that Party and its entities concerning covered procurement of its entities and the individual contracts awarded by its entities.
5. No Party may disclose confidential information the disclosure of which would prejudice the legitimate commercial interests of a particular person or might prejudice fair competition between suppliers, without the formal authorization of the person that provided the information to that Party.
6. Nothing in this Chapter shall be construed as requiring any Party to disclose confidential information the disclosure of which would impede law enforcement or otherwise be contrary to the public interest.
7. With a view to ensuring effective monitoring of procurement covered by this Chapter, each Party shall collect statistics and provide to the other Parties an annual report in accordance with the following reporting requirements, unless the Parties otherwise agree:
(a) statistics on the estimated value of all contracts awarded, both above and below the applicable threshold values, broken down by entities;
(b) statistics on the number and total value of contracts above the applicable threshold values, broken down by entities, by categories of goods and services established in accordance with classification systems developed under this Chapter and by the country of origin of the goods and services procured;
(c) statistics on the number and total value of contracts awarded under each use of the procedures referred to in Article 1016, broken down by entities, by categories of goods and services, and by country of origin of the goods and services procured; and
(d) statistics on the number and total value of contracts awarded under derogations to this Chapter set out in Annexes 1001.2a and 1001.2b, broken down by entities.
8. Each Party may organize by state or province any portion of a report referred to in paragraph 7 that pertains to entities listed in Annex 1001.1a-3.
Article 1020: Technical Cooperation
1. The Parties shall cooperate, on mutually agreed terms, to increase understanding of their respective government procurement systems, with a view to maximizing access to government procurement opportunities for the suppliers of all Parties.
2. Each Party shall provide to the other Parties and to the suppliers of such Parties, on a cost recovery basis, information concerning training and orientation programs regarding its government procurement system, and access on a non-discriminatory basis to any program it conducts.
3. The training and orientation programs referred to in paragraph 2 include:
(a) training of government personnel directly involved in government procurement procedures;
(b) training of suppliers interested in pursuing government procurement opportunities;
(c) an explanation and description of specific elements of each Party's government procurement system, such as its bid challenge mechanism; and
(d) information about government procurement market opportunities.
4. Each Party shall establish by January 1, 1994 at least one contact point to provide information on the training and orientation programs referred to in this Article.
Article 1021: Joint Programs for Small Business
1. The Parties shall establish, within 12 months after the date of entry into force of this Agreement, the Committee on Small Business, comprising representatives of the Parties. The Committee shall meet as mutually agreed, but not less than once each year, and shall report annually to the Commission on the efforts of the Parties to promote government procurement opportunities for their small businesses.
2. The Committee shall work to facilitate the following activities of the Parties:
(a) identification of available opportunities for the training of small business personnel in government procurement procedures;
(b) identification of small businesses interested in becoming trading partners of small businesses in the territory of another Party;
(c) development of data bases of small businesses in the territory of each Party for use by entities of another Party wishing to procure from small businesses;
(d) consultations regarding the factors that each Party uses in establishing its criteria for eligibility for any small business programs; and
(e) activities to address any related matter.
Article 1022: Rectifications or Modifications
1. A Party may modify its coverage under this Chapter only in exceptional circumstances.
2. Where a Party modifies its coverage under this Chapter, the Party shall:
(a) notify the other Parties and its Section of the Secretariat of the modification;
(b) reflect the change in the appropriate Annex; and
(c) propose to the other Parties appropriate compensatory adjustments to its coverage in order to maintain a level of coverage comparable to that existing prior to the modification.
3. Notwithstanding paragraphs 1 and 2, a Party may make rectifications of a purely formal nature and minor amendments to its Schedules to Annexes 1001.1a-1 through 1001.1b-3 and Annexes 1001.2a and 1001.2b, provided that it notifies such rectifications to the other Parties and its Section of the Secretariat, and another Party does not object to such proposed rectification within 30 days. In such cases, compensation need not be proposed.
4. Notwithstanding any other provision of this Chapter, a Party may undertake reorganizations of its government procurement entities covered by this Chapter, including programs through which the procurement of such entities is decentralized or the corresponding government functions cease to be performed by any government entity, whether or not subject to this Chapter. In such cases, compensation need not be proposed. No Party may undertake such reorganizations or programs to avoid the obligations of this Chapter.
5. Where a Party considers that:
(a) an adjustment proposed under paragraph (2)© is not adequate to maintain a comparable level of mutually agreed coverage, or
(b) a rectification or a minor amendment under paragraph 3 or a reorganization under paragraph 4 does not meet the applicable requirements of those paragraphs and should require compensation,
the Party may have recourse to dispute settlement procedures under Chapter Twenty (Institutional Arrangements and Dispute Settlement Procedures).
Article 1023: Divestiture of Entities
1. Nothing in this Chapter shall be construed to prevent a Party from divesting an entity covered by this Chapter.
2. If, on the public offering of shares of an entity listed in Annex 1001.1a-2, or through other methods, the entity is no longer subject to federal government control, the Party may delete the entity from its Schedule to that Annex, and withdraw the entity from the coverage of this Chapter, on notification to the other Parties and its Section of the Secretariat.
3. Where a Party objects to the withdrawal on the grounds that the entity remains subject to federal government control, that Party may have recourse to dispute settlement procedures under Chapter Twenty (Institutional Arrangements and Dispute Settlement Procedures).
Article 1024: Further Negotiations
1. The Parties shall commence further negotiations no later than December 31, 1998, with a view to the further liberalization of their respective government procurement markets.
2. In such negotiations, the Parties shall review all aspects of their government procurement practices for purposes of:
(a) assessing the functioning of their government procurement systems;
(b) seeking to expand the coverage of this Chapter, including by adding
(i) other government enterprises, and
(ii) procurement otherwise subject to legislated or administrative exceptions; and
(c) reviewing thresholds.
3. Prior to such review, the Parties shall endeavor to consult with their state and provincial governments with a view to obtaining commitments, on a voluntary and reciprocal basis, to include within this Chapter procurement by state and provincial government entities and enterprises.
4. If the negotiations pursuant to Article IX:6(b) of the GATT Agreement on Government Procurement ("the Code") are completed prior to such review, the Parties shall:
(a) immediately begin consultations with their state and provincial governments with a view to obtaining commitments, on a voluntary and reciprocal basis, to include within this Chapter procurement by state and provincial government entities and enterprises; and
(b) increase the obligations and coverage of this Chapter to a level at least commensurate with that of the Code.
5. The Parties shall undertake further negotiations, to commence no later than one year after the date of entry into force of this Agreement, on the subject of electronic transmission.
1. For purposes of this Chapter:
construction services contract means a contract for the realization by any means of civil or building works listed in Appendix 1001.1b-3-A;
entity means an entity listed in Annex 1001.1a-1, 1001.1a-2 or 1001.1a-3;
goods of another Party means goods originating in the territory of another Party, determined in accordance with Article 1004;
international standard means "international standard", as defined in Article 915 (Definitions - Standards-Related Measures);
limited tendering procedures means procedures where an entity contacts suppliers individually, only in the circumstances and under the conditions specified in Article 1016;
locally established supplier includes a natural person resident in the territory of the Party, an enterprise organized or established under the Party's law, and a branch or representative office located in the Party's territory;
open tendering procedures means those procedures under which all interested suppliers may submit a tender;
selective tendering procedures means procedures under which, consistent with Article 1011(3), those suppliers invited to do so by an entity may submit a tender;
services includes construction services contracts, unless otherwise specified;
standard means "standard", as defined in Article 915;
supplier means a person that has provided or could provide goods or services in response to an entity's call for tender;
technical regulation means "technical regulation", as defined in Article 915;
technical specification means a specification which lays down goods characteristics or their related processes and production methods, or services characteristics or their related operating methods, including the applicable administrative provisions. It may also include or deal exclusively with terminology, symbols, packaging, marking or labelling requirements as they apply to a good, process, or production or operating method; and
tendering procedures means open tendering procedures, selective tendering procedures and limited tendering procedures.
Continue on to Annex 1001.1a-1
If you have questions or comments, please e-mail [email protected]